2019

  • Colin, D.; Bel, S.; Hans, T.; Hartmann, M.: Virtual Description of a Biaxial 0°/90° Non-Crimp Fabric with Normally Distributed Filament Directions. ESAFORM 2019 - 22th International ESAFORM Conference on Material Forming , 2019 mehr…
  • Heller, K., Hallmannseder, M., Colin, D., Kind, K., Drechsler, K.: Comparing Test Methods for the Deformation Behavior of Uncured Prepreg Tapes. ACM4 - The Fourth International Symposium on Automated Composites Manufacturing, 2019 mehr…
  • Sommacal, S.; Kingston, A.; Plöckl, M.; Matschinski, A.; Consul, P.; Saadatfar, M.; Compston, P.: 3D Characterisation of carbon fibre reinforced composite microstructure via X-ray computed tomography. ICCM22 - 22nd International Conference on Composite Materials, 2019 mehr…
  • Stokes-Griffin, C.; Kollmannsberger, A.; Compston, P.; Drechsler K.: Steel-CF/PA 6 hybrids manufactured by a laser tape placement process: Effect of first-ply placement rate on lap shear strength for garnet blasted substrates. SHEMET 2019 - 18th International Conference on Sheet Metal, 2019 mehr…

2018

  • Böckl, B.; Jetten, C.; Heller, K.; Ebel, C.; Drechsler K.: Online monitoring system for the tack of prepreg slit tapes used in automated fiber placement. ECCM18 - 18th European Conference on Composite Materials, 2018 mehr…
  • Colin, D.; Bel, S.; Hans, T.; Hartmann, M.: Towards a virtual characterization of biaxial non-crimp fabric. ECCM18 - 18th European Conference on Composite Materials, 2018 mehr…
  • Colin, D.; Bel, S.; Hans, T.; Hartmann, M.: On the inter-stitch interaction in biaxial non-crimp fabrics. ESAFORM 2018 - 21th International ESAFORM Conference on Material Forming , 2018 mehr…
  • Engelhardt, R.; Brath, K.; Ebel, C.; Drechsler, K.: Experimental analysis of the compaction behavior during thermoset automated fiber placement. ECCM18 - 18th European Conference on Composite Materials, 2018 mehr…
  • Heller, K.; Böckl, B.; Ebel, C.; Drechsler, K.: Influence of Prepreg Aging and Tack on Lay-Up Effects/defects in Thermoset Automated Fiber Placement. ECCM18 - 18th European Conference on Composite Materials, 2018 mehr…
  • Kind, K.; Böckl, B.; Zaremba, S.; Drechsler, K.: Increasing permeability of dry-fiber-placed preforms. FPCM14 - The 14th international conference on flow processing in composite materials, 2018 mehr…
  • Lipcan, M.; Balvers, J.M.; Hartmann, M.: A strategy for cost-effective compensation of process induced deformations in composite structures. ECCM18 - 18th European Conference on Composite Materials, 2018 mehr…
  • Maidl, S.: Investigating the use of friction to achieve ductility in composites. SAMPE Europe Conference 2018, 2018 mehr…
  • Maidl, S; Mierzwa, A; Ebel, C; Drechsler, K.: Development of a novel type of online monitoring system for the braiding process. ECCM18 - 18th European Conference on Composite Materials, 2018 mehr…
  • Oblinger, C.; Baeten, A.; Drechsler, K.: Experimental investigation of the design concept for a non-engaging bellows coupling made of prepreg-based carbon fiber reinforced polymers. Hybrid - Materials and Structures 2018, 2018 mehr…
  • Teufl, D.; Zaremba, S.: Processing of (glass) fiber reinforced plastics with 2.45 GHz microwaves: current state, challenges and perspectives. ECCM18 - 18th European Conference on Composite Materials, 2018 mehr…
  • Venkat, S.; Hartmann, M.: Virtual test bench to characterize load bearing behavior of laminates with out-of-plane ply deflections and localized wrinkles. ECCM18 - 18th European Conference on Composite Materials, 2018 mehr…
  • Vollmer, M.; Tagscherer, N.; Zaremba, S.; Schultheiß, D.; Mertiny, P.; Drechsler, K.: Material Characterization for Compression Resin Transfer Molding Process Simulation. ECCM18 - 18th European Conference on Composite Materials, 2018 mehr…
  • Wettemann, T.; Henne, F.; Schneiderbauer, G.; Pinto, R.; Drechsler, K.; Ladstätter, E.; Tejerina Hernanz, R.: A contribution on TP AFP in situ consolidation processing and the opportunity to produce high performance composites in an additive manner. SAMPE Europe Conference 2018, 2018 mehr…

2017

  • Copony, M.; Hartmann, M.: Towards a simulation strategy to predict laminate quality and porosity for partially impregnated CFRP prepregs. CamX 2017, 2017 mehr…
  • Höck, B.; Link, T.; Glaser, U.; Ehard, S.; Petersen, E.; Schullerer, G.: Development, Manufacturing and Testing of CFRP Aluminum Hybrid Structures for Aerospace Applications. DLRK2017 - Deutscher Luft- und Raumfahrtkongress, 2017 mehr…
  • Krollmann, J.; Neuchl, S., Schaefer, P.M.; Achleitner, J.; Drechsler, K.: Hybrid-matrix composites: materials and manufacturing. SAMPE 2017 - Society of the Advancement Material and Process Engineering, 2017 mehr…
  • Oelhafen J.; Muschaweckh F.; Zaremba S.; Drechsler K.: Fibre optical temperature sensor for distributed sensing in composite moulds. ICCM21 - 21th International Conference on Composite Materials, 2017 mehr…
  • Oelhafen, J.; Mayr, T.; Moutzouris, K.; Roths, J.; Drechsler, K.: Calibration and uncertainty of a fibre optic measurement system for Fresnel reflectometer sensors. 25th International Conference on Optical Fiber Sensors, 2017 mehr…
  • Schug, A.; Popp, M.; Margossian, A.; Hinterhölzl, R.; Drechsler, K.: Forming behaviour and achievable part quality of thermosetting AFP-Towpreg-Laminates. SAMPE Europe Conference, 2017 mehr…
  • Stokes-Griffin, C.; Kollmannsberger, A.; Compston, P.: Investigation of the effects of heating bias and placement head angle on the short beam strength of CF/PEEK laminates manufactured in a laser tape placement process. ACAM9- 9th Australian Congress on Applied Mechanics, 2017 mehr…

2016

  • Ehard, S.; Ladstätter, E.; Jürgens, M.; Bortolotto, L.; Remer, N.: Development of a hybrid tail rotor drive shaft by the use of Thermoplastic Automated Fiber Placement. ECCM17 - 17th European Conference on Composite Materials, 2016 mehr…
  • Ehard, S.; Mader, A.; Ladstätter, E.; Drechsler, K.: Thermoplastic Automated Fiber Placement for manufacturing of metal-composite hybrid parts. Euro Hybrid Materials and Structures 2016, 2016 mehr…
  • Fahr, P.; Hinterhölzl, R.: Numerical investigation of interference fit assemblies and the influence of varying the laminate thickness. ECCM17 - 17th European Conference on Composite Materials, 2016 mehr…
  • Horn, B.; Ebel, C.; Drechsler, K.: Strategies to increase the mechanical performance of long fiber patch preforms. ECCM17 - 17th European Conference on Composite Materials, 2016 mehr…
  • Jelinek, M.; Oblinger, C.; Baeten, A.; Drechsler, K.; Reinhart, G.: Development, manufacturing and testing of a CFRP metal hybrid gripper for highly dynamic manipulation processes. Euro Hybrid Materials and Structures 2016, 2016 mehr…
  • Jürgens, M.; Hafe Perez Ferreira da Silva, M.T.; Ladstätter, E.: Shear-Out failure behaviour of surface structured metallic z-reinforcements for CFRP laminates and joints. ECCM17 - 17th European Conference on Composite Materials, 2016 mehr…
  • Kammerhofer, P.; Zaremba, S.; Drechsler, K.: Investigation of thermal ageing of advanced CFRP tooling laminate by gas permeability. ECCM17 - 17th European Conference on Composite Materials, 2016 mehr…
  • Koch, C.; Nonn, A.; Maidl, F.; Maurer, T.; Töpker, J.; Bickerton, S.; Ladstätter, E.: Influence of textile architecture by processing carbon fiber based Non-Crimp Fabrics in automotive serial application using High-Pressure-RTM. ECCM17 - 17th European Conference on Composite Materials, 2016 mehr…
  • Kollmannsberger, A.; Ladstätter, E.; Drechsler, K.: Challenges for Thermoplastic-Automated Fiber Placement (TP-AFP) with in situ consolidation on 3D parts. ECCM17 - 17th European Conference on Composite Materials, 2016 mehr…
  • Krollmann, J.; Alvarado, C. S.; Carqueville, P.; Snajdr, R.; Zaremba, S.; Drechsler, K.: Hybrid-matrix processing: How to co-inject multiple resin systems into one composite part. ECCM17 - 17th European Conference on Composite Materials, 2016 mehr…
  • Krollmann, J.; Colin, D.; Avila Gray, L.; Zaremba, S.; Drechsler, K.: Bending characterization of axis and off-axis fiber-reinforced hinges at large deflection. SAMPE 2016 - Society of the Advancement Material and Process Engineering , 2016 mehr…
  • Kuhn, P; Catalanotti, G.; Xavier, J., R.; Körber, H.; Camanho, P.P.: Measurement of fracture toughness for fiber tensile failure mode of UD composites under high rate loading. ICCS19 - 19th International Conference on Composite Structures, 2016 mehr…
  • Kuhn, P; Catalanotti, G.; Xavier, J.; Cidade, R.; Körber, H.; Camanho, P.P.: Measurement of fracture toughness for fiber compressive failure mode of UD composites under high rate loading. ECCM17 - 17th European Conference on Composite Materials, 2016 mehr…
  • Lipcan, M.; Balvers, J.M.: Interface evaluation for efficient integration of manufacturing distortion simulation results in an industrial design process. SICOMP27 -27th Annual International SICOMP Conference, 2016 mehr…
  • Lipcan, M.; Balvers, J.M.: Pre-Assessment of distortion in frame-like composite structures for Industrial application. ECCM17 - 17th European Conference on Composite Materials, 2016 mehr…
  • Margossian, A.; Bel, S.; Hinterhölzl, R.: On the modeling of separation foils in thermoforming simulations. ESAFORM 2016 - 19th International ESAFORM Conference on Material Forming, 2016 mehr…
  • Mierzwa, A.; Ebel, C.; Harbers, T.; Drechsler, K.: Investigation on creation of fibrous rings and their influence on the braided perform quality. ECCM17 - 17th European Conference on Composite Materials, 2016 mehr…
  • Oblinger, C.; Jelinek, M.; Lang, H.; Baeten, A.; Drechsler, K.; Reinhart, G.: Development, manufactuing and testing of a CFRP bellows coupling for powertrain applications. Euro Hybrid Materials and Structures 2016, 2016 mehr…
  • Plank, B.; Helmus, R.; Gschwandtner, M.; Hinterhölzl, R.; Kastner, J.: In-Situ observation of bubble formation in neat resin during the curing process by means of X-ray computed tomography. WCNDT 2016 - 19th World Conference on Non-Destructive Testing , 2016 mehr…
  • Schwingenschlögl, A.; Endres, A.; Harbers, T.; Lütke, C.; Teufl, D.: Use of recycled (carbon) fibers in wetlaid-nonwovens - Current status, potentials and ongoing research efforts. CAMX 2016 - The Composite and Advanced Materials Expo, 2016 mehr…
  • Schwingenschlögl, A.; Verghese, N.; Bruckbauer, P.; Ehard. S.; Drechsler, K.: Towards thermoplastic carbon fiber reinforced plastics for the automotive industry - The need for and potential of fusion bonding and hybridization. ECCM17 - 17th European Conference on Composite Materials, 2016 mehr…
  • Schäfer, P. M.; Kreuzhage, S.; Zaremba, S.; Drechsler, K.: Experimental Investigation of inter-layer thermal contact resistance and its relevance for consolidation of thermoplastic composites. ECCM17 - 17th European Conference on Composite Materials, 2016 mehr…
  • Schütte, J.; Hoffmann, J.; Ladstätter, E.; Drechsler, K.: Manufacturing CFRP sandwich parts using wet moulding. ECCM17 - 17th European Conference on Composite Materials, 2016 mehr…
  • Stefanziosa, C.; Drechsler, K.; Ladstätter, E.; Zimmermann, T.: New production process for manufacturing continuous fiber-reinforced thermoplastic hollow profile components. ECCM17 - 17th European Conference on Composite Materials, 2016 mehr…
  • Stokes-Griffin, C.; Ehard, S.; Kollmannsberger, A.; Compston, P.; Drechsler, K.: Selective reinforcment of steel with CF/PA6 composites in a laser tape placment process: Effect of surface preparation and laser angle on interfacial bond strength. ECCM17 - 17th European Conference on Composite Materials, 2016 mehr…

2015

  • Bockelmann, P.; Drechsler, K.; Chakrabarti, A.: Research on development of Liquid Composite Molding parts: situation & framework. ICoRD'15 - 5th International Conference on Research into Design, 2015 mehr…
  • Brand, M.; Ladstätter, E.; Drechsler, K.: Influence of braid set up and roving size to mechanical properties of biaxial carbon fiber braids. Polymer Processing Society Conference (PPS) 2015, 2015 mehr…
  • Brouzoulis, J.; Fagerström, M.; Främby, J.; Krollmann, J.; Hellström, P.: Modelling of propagating delaminations in textile reinforced duroplast beams by an enriched shell element formulation. ICCM-20 - 20th International Conference on Composite Materials, 2015 mehr…
  • Bruckbauer, P.; Weiland, F.; Beier, U.; Drechsler, K.: Characterization of thermoplastic/thermoset combinations - potential application for joining. SAMPE Europe Conference 15 Amiens, 2015 mehr…
  • Eberl, L.; Kray, N.; Zaremba, S.; Drechsler, K.: Design of Through Thickness Reinforced Composite/Metal Joints - With the Help of Finite Element Analysis and Quasistatic Testing Using Digital Image Correlation. CAMX 2015 - The Composites and Advanced Materials Expo, 2015 mehr…
  • Eberl, L.; Zaremba, S.; Drechlser, K.: Through Thickness Reinforced Composite/Metal Joints - The Impact of the Pinning Technology on The Joint's Tensile Strength. ICCM-20 - 20th International Conference on Composite Materials, 2015 mehr…
  • Fahr, P.; Hinterhölzl, R.: Evaluation of an analytical analysis method for interference fit assemblies focusing on thick-walled parts based on experimentel data. ICCM-20 - 20th International Conference on Composite Materials, 2015 mehr…
  • Gstrein, G.; Kurzböck, C.; Opelka, J-M.; Krollmann, J.: Simulation and testing of adaptive FRP- substructures for automotive safety. 24th International Technical Conference on the Enhanced Safety of Vehicles (ESV), 2015 mehr…
  • Hans, T.; Hinterhölzl, R.: A numerical approach modeling the braiding process for arbitrary mandrel shapes to calculate preform properties. ICCM-20 - 20th International Conference on Composite Materials, 2015 mehr…
  • Harbers, T.; Ebel, C.; Drechsler, K.; Endres, A.; Müller, G.: Wetlaid nonwovens made from recycled carbon fiber for automotive applications. SAMPE Baltimore 2015, 2015 mehr…
  • Helmus, R.; Hinterhölzl, R.; Hubert, P.: A stochastic approach to model void formation during Out-of-Autoclave prepreg consoldiation. ICCM-20 - 20th International Conference on Composite Materials, 2015 mehr…
  • Horn, B.; Sattler, S.; Ebel, C.; Drechsler, K.: Cutting strategies of long fiber patch preforms for structures with complex fiber architecture. ICCM-20 - 20th International Conference on Composite Materials, 2015 mehr…
  • Höck, B.; Regnet, M.; Fröhlich, A.; Wolff, M.; Ehard, S.; Sause, M.; Kupke, M.; Schullerer, G.: Successful development and monitoring of CRFP manufacturing technologies. 64. Deutscher Luft- und Raumfahrtkongress 2015, 2015 mehr…
  • Höck, B.; Regnet, M.; Fröhlich, A.; Wolff, M.; Ehard, S.; Sause, M.; Pfister, O.; Schullerer, G.: Successful development and monitoring of CFRP manufacturing technologies. 66th International Astronautical Congress, 2015 mehr…
  • Jürgens, M.; Kurtovic, A.; Mertens, T.; Kolb, M.; Greitemeier, D.; Lang, H.; Hombergsmeier, E.; Drechsler, K.: Influence of surface treatment and design of 3D-reinforcements on delamination resistance & mechanical properties of CFRP/CFRP joints under static & fatigue loading. ICCM-20 - 20th International Conference on Composite Materials, 2015 mehr…
  • Jürgens, M.; Kurtovic, A.; Mertens, T.; Nogueira, A.C.; Lang, H.; Kolb, M.; Strobach, P.; Hombergsmeier, E.; Drechsler, K.: Effect of surface treatment for metallic z-reinforcements on interlaminar fracture toughness of CFRP/CFRP joints. SAMPE Baltimore 2015, 2015 mehr…
  • Kammerhofer, P.; Zaremba, S.; Drechsler, K.: Investigation on the mechanical robustness of CFRP molds. ICCM-20 - 20th International Conference on Composite Materials, 2015 mehr…
  • Kind, K.; Drechsler, K.: Method for the production of braided CFRP bicycle rims. SAMPE Europe Conference 15 Amiens, 2015 mehr…
  • Kourkoutsaki, T.; Comas Cardona, S.; Masania, K.; Upadhyay, R.; Hinterhölzl, R.: A process modeling toolkit developed to address scale-up challenges of Out-of-Autoclave manufacturing. CAMX 2015 - The Composites and Advanced Materials Expo, 2015 mehr…
  • Krollmann, J.; Snajdr, R.; Paz, M.; Zaremba, S.; Drechsler, K.: Hybrid-matrix approach: How to overcome the conflict of the matrix selection? Polymer Processing Society Conference (PPS) 2015, 2015 mehr…
  • Kuhn, P.; Plöckl, M.; Körber, H.: Experimental investigation of the failure envelope of unidirectional carbon-epoxy composite under high strain rate transverse and off-axis tensile loading. 11th International DYMAT Conference, 2015 mehr…
  • Lemke, C.; Wolfahrt, M.; Reppe, M.; Ladstätter, E.; Drechsler, K.: Disassembly of fusion-bonded thermoplastic composite structures. Second European Symposium on Aircraft Recycling , 2015 mehr…
  • Mandel, U.; Taubert, R.; Hinterhölzl, R.: A continuum damage approach for an efficient ultimate failure analysis with layered shell elements. 5th ECCOMAS Thematic Conference on Mechanical Response of Composites, 2015 mehr…
  • Mandel, U.; Taubert, R.; Hinterhölzl, R.: Laminate damage model for CFRP structures. ICCST/10 - 10th International Conference on Composite Science and Technology, 2015 mehr…
  • Margossian, A.; Bel, S.; Avila Gray, L.; Hinterhölzl, R.: Characterisation of tensile properties perpendicular to fibre direction of a unidirectional thermoplastic composite using a Dynamic Mechanical Analysis system. ESAFORM 2015 - 18th International ESAFORM Conference on Material Forming , 2015 mehr…
  • Margossian, A.; Hörmann, P.; Zemliana, K.; Avila Gray, L.; Bel, S.; Hinterhölzl, R.: Shear characterisation of unidirectional thermoset pre-impregnated composites using a rheometre. 19èmes Journées Nationales sur les Composites, 2015 mehr…
  • Mayer, N.; Hinterhölzl, R.; Prowe, J.: Structural analysis of composites considering manufacturing constraints. ICCS18 - 18th International Conference on Composite Structures, 2015 mehr…
  • Oelhafen, J.; Fernandez, R.; Niefnecker, D.; Zaremba, S.; Drechsler, K.: Flow front and cure monitoring with fibre optic sensors for thick CFRP laminates. ICCM-20 - 20th International Conference on Composite Materials, 2015 mehr…
  • Plöckl, M.; Kuhn, P.; Körber, H.: Characterization of unidirectional carbon fiber reinforced polyamide-6 thermoplastic composite under longitudinal compression loading at high strain rate. 11th International DYMAT Conference, 2015 mehr…
  • Radlmaier, V.; Erber, A.; Brudzinski, P.-V.; Körber, H.; Drechsler, K.: Influence of different sizing on fracture toughness and flexural properties of carbon fiber reinforced polyphthalamide. ICCM-20 - 20th International Conference on Composite Materials, 2015 mehr…
  • Radlmaier, V.; Obermeier, G.; Ehard, S.; Kollmannsberger, A.; Körber, H.; Ladstätter, E.: Interlaminar Fracture Toughness of Carbon Fiber Reinforced Thermoplastic In-situ Joints. Polymer Processing Society Conference (PPS) 2015, 2015 mehr…
  • Schäfer, M.; Zaremba, S.; Drechsler, K.: Comparative Study on Internal and External Release Agents - Evaluation of Process Parameter Variation on Demolding Stresses. ICCM-20 - 20th International Conference on Composite Materials, 2015 mehr…
  • Schäfer, P.; Staden, M.; Zaremba, S.; Drechsler, K.: Materialcharacterization for determining the consolidation properties of carbon fiber tapes with PA 6 matrix. ICCM-20 - 20th International Conference on Composite Materials, 2015 mehr…
  • Taubert, R.; Mandel, U.; Hinterhölzl, R.: Influence of the stacking sequence on the nonlinear material behvior of composite laminates related to large deformations. ICCST/10 - 10th International Conference on Composite Science and Technology, 2015 mehr…
  • Teufl, D.; Zaremba, S.; Drechsler, K.: Adjustment of 2.45 GHz Microwave Absorbing Heating Layers for Tooling Applications. Polymer Processing Society Conference (PPS) 2015, 2015 mehr…
  • Treffler, R.; Fröschl, J.; Ladstätter, E.: Einsatz wirrfaserverstärkter Duroplaste in thermomechanisch belasteten Strukturbauteilen im Fahrzeugbau. 42. Tagung DVM-Arbeitskreis Betriebsfestigkeit, 2015 mehr…
  • Treffler, R.; Dick, T.; Fröschl, J.; Drechsler, K.; Ladstätter, E.: Modelling and simulation of randomly oriented carbon fibre-reinforced composites under thermal load. MPPE 2015 - International Conference on Materials, Processing and Product Engineering 2015, 2015 mehr…
  • Weiland, J.; Hartmann, M.; Hinterhölzl, R.: Characterization and numerical investigation of an RTM cure process with CFRP molds and independent heat patches. ICCM-20 - 20th International Conference on Composite Materials, 2015 mehr…

2014

  • Altmann, A.; Taubert, R.; Mandel, U.; Hinterhölzl, R.; Drechsler, K.: A continuum damage model considering ply waviness. SAMPE Europe SETEC 14 - Efficient composite solutions to foster economic growth, 2014 mehr…
  • D'Angelo, C.; Margossian, A.; Balvers, J.; Freitas, R.; Hinterhölzl, R.: Joining techniques in multi-ply preforming operations - characterization and modelling for virtual forming. 63. Deutscher Luft- und Raumfahrtkongress 2014, 2014 mehr…
  • Eisenhauer, C.; Drechsler, K.: Textile development: highly drapable, contoured textiles for composite parts. SAMPE Europe SETEC 14 - Efficient composite solutions to foster economic growth, 2014 mehr…
  • Engelhardt, R.; Hörmann, P.; Rinker, F.; Weyerer, G.; Drechsler, K.: Analysis of the cost efficiency of Automated Fiber Placement based on an extensive process breakdown. SEICO 14-35th International Technical Conference & Forum "Low Cost Composite Processing, from Aerospace OOA to Automotive Thermoplastic", 2014 mehr…
  • Harbers, T.; Ebel, C.; Drechsler, K.; Endres, A.; Müller, G.: Wetlaid nonwovens as a resource-efficient manufactured semifinished product for composite structures made from recycled carbon fibers. CRETE 2014 - 4th International Conference on Industrial and Hazardous Waste Management, 2014 mehr…
  • Harbers, T.; Ebel, C.; Drechsler, K.; Endres, A.; Müller, G.: Highly efficient production and characterization of CFRP made from recycled carbon fibers. SEICO 14-35th International Technical Conference & Forum "Low Cost Composite Processing, from Aerospace OOA to Automotive Thermoplastic", 2014 mehr…
  • Hartmann, M.; Hinterhölzl, R.: Process Induced Deformations - A study on sandwich panels. SAMPE Seattle 2014, 2014 mehr…
  • Henne, F.; Ehard, S.; Kollmannsberger, A.; Höck, B.; Sause, M.; Drechsler, K.: Thermoplastic in situ fiber placment for future solid rocket motor casing manufacturing. SAMPE Europe SETEC 14 - Efficient composite solutions to foster economic growth, 2014 mehr…
  • Kourkoutsaki, T.; Comas Cardona, S.; Binetruy, C.; Upadhyay, R.; Hinterhölzl, R.: Impact of air evacuation in Out-of Autoclave flow & compaction modeling. ECCM16 - 16th European Conference on Composite Materials, 2014 mehr…
  • Kourkoutsaki, T.; Upadhyay, R.; Hinterhölzl, R.; Comas-Cardona, S.; Binetruy, C.: Air evacuation in consolidation modeling of Out-of-Autoclave prepregs. FPCM12 - 12th International Conference on Flow Processing in Composite Materials, 2014 mehr…
  • Körber, H.; Vogler, M.; Kuhn, P.; Camanho, P.P.: Experimental characterisation and modelling of non-linear stress-strain behaviour and strain rate effects for unidirectional carbon-epoxy. ECCM16 - 16th European Conference on Composite Materials, 2014 mehr…
  • Lemke, C.; Wolfahrt, M.; Reppe, M.; Zaremba, S.; Drechsler, K.: Disassembly of fusion-bonded thermoplastic composite structures. SAMPE Europe SETEC 14 - Efficient composite solutions to foster economic growth, 2014 mehr…
  • Lichtinger, R.; Hörmann, P.; Stelzl, D.; Hinterhölzl, R.: Thermal simulation of the Automated Fiber Placement process and its validation. 8. Internationale CFK-Valley Stade Convention, 2014 mehr…
  • Margossian, A.; Ding, M.; Avila Gray, L.; Bel, S.; Hinterhölzl, R.: Flexural characterisation of unidirectional thermoplastic tapes using a Dynamic Mechanical Analysis system. ECCM16 - 16th European Conference on Composite Materials, 2014 mehr…
  • Mayer, N.; Hinterhölzl, R.; Prowe, J.: Finite Element mapping for a structural analysis of composites. ECCM16 - 16th European Conference on Composite Materials, 2014 mehr…
  • Mitwalsky, M.; Lee, S.; Veihelmann, B.; Brand, M.; Ebel, C.; Drechsler, K.: Online Tow spreading in the braiding process. SEICO 14-35th International Technical Conference & Forum "Low Cost Composite Processing, from Aerospace OOA to Automotive Thermoplastic", 2014 mehr…
  • Radlmaier, V.; Henne, F.; Ladstätter, E.: Novel environmentally friendly manufacturing approach for thermoplastic composite helicopter doors. Greener Aviation 2014 Conference, 2014 mehr…
  • Swery, E.; Meier, R.; Lomov, S.; Hahn, C.; Kelly, P.; Straumit, I.: Verification of Flowtex solver using Ansys CFX - examining the permeability prediction method on a range of textile architecture models. ECCM16 - 16th European Conference on Composite Materials, 2014 mehr…
  • Teufl, D.; Zaremba, S.; Drechsler, K.: Evaluation of tooling concepts for the use in microwave processing of fiber reinforced plastics. SAMPE Europe SETEC 14 - Efficient composite solutions to foster economic growth, 2014 mehr…
  • Walbran, A.; Körber, H.: Fast and efficient permeability and compaction characterisation of dry textiles: considerations for a proposed technique. ECCM16 - 16th European Conference on Composite Materials, 2014 mehr…
  • Wehrkamp-Richter, T.; Brand, M.; Bockelmann, P.; Ki, W.; Hinterhölzl, R.: Design and analysis of a carbon fiber braided stabilizer bar. The 63rd World Congress on Carbon (Carbon2014) - Carbon Materials for Ubiquitous and Sustainable Life, 2014 mehr…
  • Wehrkamp-Richter, T.; Pinho, S.T.; Hinterhölzl, R.: Non-linear mechanical response of triaxial braided composites under tension. ECCM16 - 16th European Conference on Composite Materials, 2014 mehr…

2013

  • Altmann, A.; Zaremba, S.; Hinterhölzl, R.; Drechsler, K.: Novel injection process for long fiber composites using rotation. ICCM19 - 19th International Conference on Composite Materials, 2013 mehr…
  • Bel, S.; Margossian, A.; Leutz, D.; Beier, U.; Hinterhölzl, R.; Drechsler, K.: Validation of local stitching simulation for stitched NCF ply stacks. ICCM19 - 19th International Conference on Composite Materials, 2013 mehr…
  • Bender, B.; Ehard, S.; Žika, M.; Middendorf, P.: Stoffschlüssiges Fügen von Aluminium und CFK durch die Epoxidharz Matrix für die Herstellung hybrider Strukturbauteile. DGM - 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, 2013 mehr…
  • Cichosz, J.; Bückle, J.; Hinterhölzl, R.; Wolfahrt, M.: Predicting the constitutive behavior of biaxial braided composites using beam unit cells. ICCM19 - 19th International Conference on Composite Materials , 2013 mehr…
  • Cichosz, J.; Huber, X.; Hinterhölzl, R.: Off-axis testing of biaxial braided composites. TexComp-11, 2013 mehr…
  • Dix, M.; Bickerton, S.; Tryfondis, M.; Hinterhölzl, R.: Consistent virtual CFRP process chain using a modular CAE interface. NAFEMS World Congress, 2013 mehr…
  • Ebel, C.; Brand, M.; Drechsler, K.: Effects of fiber damage on the efficiency of the braiding process. TexComp-11, 2013 mehr…
  • Hahn, C.; Winterstein, E.; Straumit, I.; Plank, B.; Hinterhölzl, R.; Lomov, S.; Binetruy, C.: A simulation approach of permeability determination using computed tomography scans. TexComp-11, 2013 mehr…
  • Hartmann, M.; Strebinger, M.; Hinterhölzl, R.: An approach towards a basic materials characterization for the simulation of Process Induced Deformations. ICCM19 - 19th International Conference on Composite Materials, 2013 mehr…
  • Heimbs, S.; Mierzwa, A.; Duwensee, T.; Nogueira, A.C.; Breu, C.; May, M.; Less, C.; Wolfrum, J.: Investigation of static and dynamic failure behaviour of composite T-joints. Composites 2013 - 4th ECCOMAS Thematic Conference on the Mechanical Response of Composites, 2013 mehr…
  • Hörmann, P.; Lichtinger, R.; Stelzl, D.; Drechsler, K.: Experimental investigation of heat transfer during thermoset Automated Fiber Placement. SEICO13 - 34th International Technical Conference & Forum "Advanced Composites on its way to industrialization", 2013 mehr…
  • Meier, R.; Heim, D.; Nieratschker, A.; Zaremba, S.; Drechsler, K.: Investigation of influencing parameters with respect to filling time in vibration assisted RTM processes. ICCM19 - 19th International Conference on Composite Materials, 2013 mehr…
  • Meier, R.; Kirdar, X.; Rudolph, N.; Zaremba, S.; Drechsler, K.: Investigation of the shear thinning behavior of epoxy resins for utilization in vibration assisted Liquid Composite Molding processes. PPS29 - 29th International Conference of the Polymer Processing Society, 2013 mehr…
  • Schultheiß, D.; Becker, X.; Ebel, C.; Zaremba, S.; Drechsler, K.: A novel composition for removable internal tooling of hollow composite structures. ICCM19 - 19th International Conference on Composite Materials , 2013 mehr…
  • Wehrkamp-Richter, T.; Humbs, M.; Schultheiß, D.; Hinterhölzl, R.: Damage characterization of triaxial braided composites under tension using full-field strain measurement. ICCM19 - 19th International Conference on Composite Materials, 2013 mehr…
  • Wille, T.; Hein, R.; Horn, M.; Kappel, A.; Knote, A.; Opitz, M.; Mayer, N.; Prowe, J.; Calomfirescu, M.; Balvers, J.; Apmann, H.: Development, implementation and demonstration of a composite tool chain for concurrent engineering. CFK Valley Stade Convention, 2013 mehr…
  • Wille, T.; Hein, R.; Mayer, N.; Prowe, J.; Calomfirescu, M.; Balvers, J.; Apmann, H.: Development, implementation and demonstration of a composite tool chain for concurrent engineering. NAFEMS World Congress, 2013 mehr…

2012

  • Cichosz, J.; Wehrkamp-Richter, T.; Hinterhölzl, R.; Drechsler, K.: Material modeling of 2x2 braided composites using a beam approach. ECCM15 - 15th European Conference on Composite Materials, 2012 mehr…
  • De Greef, J.; Shen, Y.; Hahn, C.; Lomov, S.; Roose, D.; Verleye, B.; Verpoest, I.: Efficent generation of the voxel description of textile geometries for the computation of the permeability. FPCM11 - Eleventh International Conference on Flow Processes in Composite Materials, 2012 mehr…
  • Hahn, C.; Binetruy, C.; Hinterhölzl, R.; Drechsler, K.: A numerical method of permeability determination for RTM process simulation. FPCM11 - Eleventh International Conference on Flow Processes in Composite Materials, 2012 mehr…
  • Heim, D.; Zaremba, S.; Drechsler, K.: Investigation of critical fiber length in phenol matrix based short fiber CFRP. ICACC´12 - 36th International Conference and Expo on Advanced Ceramics and Composites, 2012 mehr…
  • Kollmannsberger, A.; Brand, M.: Braiding a convertible windscreen frame with concave sections. JEC Composites Magazine # 74, 2012 mehr…
  • Meier, R.; Zaremba, S.; Springl, F.; Drechsler, K.; Gaille, F.; Weimer, C.: Online process monitoring systems - benchmark and test study. FPCM11 - Eleventh International Conference on Flow Processes in Composite Materials, 2012 mehr…
  • Verleye, B; Nuyens, D.; Walbran, A.; Gan, M.: Uncertainty quantification in Liquid Composite Moulding processes. FPCM11 - Eleventh International Conference on Flow Processes in Composite Materials, 2012 mehr…

2011

  • Altmann, A.; Drechsler K.: New material and design studies of wind turbine blades. Haus der Technik - 3rd Technical Conference "Wind Turbine Rotor Blades", 2011 mehr…
  • Heim, D.: Parameter study of short fiber carbon reinforced carbon. ICCM18 - 18th International Conference on Composite Materials, 2011 mehr…
  • Leutz, D.; Klüpfel, M.; Dumont, F.; Hinterhölzl, R.; Drechsler, K.; Weimer, C.: FE-simulation of the diaphragm draping process for NCF on a macro-scale level. AIP Conference, 2011 mehr…